1 giờ trước đây Dev-Team đã tung ra công cụ mở khóa cho iPhone với tên gọi quá thân thuộc ultrasn0w phiên bản 1.0-1, với phiên bản nâng cấp này, cộng đồng người dùng iPhone trên toàn thế giới một lần nữa lại tặng cho Dev-Team những tràng vỗ tay không ngớt.
Version 1.0-1 of ultrasn0w works for:
iPhone4 baseband 01.59
3G/3GS basebands 04.26.08, 05.11.07, 05.12.01 and 05.13.04
(Nếu bạn không thấy ultrasn0w hiển trị khi bạn tìm kiếm trong Cydia, bạn hãy thêm vào nguồn sau: repo666.ultrasn0w.com)
Một thành viên của HHVN iPhone Team đã nhận được iPhone 4G vào lúc 5h ngày 23/6/2010 (giờ US) tức là sớm hơn 1 ngày thông qua đường bưu điện.
Sau khi trao đổi nhanh thông qua YM, Wildcat chỉ thấy chủ nhân của iPhone 4G này phát biểu là “Trên cả tuyệt vời”, do mải mê tìm hiểu và quá thích thú với sản phẩm mới này của Apple nên chủ nhân của iPhone 4G chỉ kịp chụp vài tấm hình, còn về review sẽ viết sau.
Giữ đúng lời hứa, ngay sau khi Apple cho phép upgrade FW phiên bản 4.0 cho iPhone và iPod thì ngay sau đó Dev Team đã thông báo về việc giải mã thành công FW 4.0 này. Và hôm nay họ đã chính thức cho phép download công cụ Jailbreak PwnageTool 4.0
Như đã cảnh báo từ trước, nếu bạn đang sử dụng iPhone đã unlock thì bạn KHÔNG nên upgrade lên FW 4.0
ĐỌC KỸ HƯỚNG DẪN SỬ DỤNG TRƯỚC KHI DÙNG. CÓ NHỮNG LƯU Ý ĐẶC BIỆT QUAN TRỌNG KHI BẠN SỬ DỤNG CÔNG CỤ NÀY
Mỗi thiết bị khác nhau sẽ có những lựa chọn khác nhau mà bạn cần phải nắm rõ khi tiến hành thao tác nâng cấp. Bạn cần phải kiểm tra kỹ lưỡng phương pháp nâng cấp nào là dành cho thiết bị của mình.
Update 1: [Don’t go near this if you have 3GS, newer ipt2G, or any ipt3G] Thanks to daring experimenters in the comments, we can confirm that yesterday’s redsn0w works for today’s 3.1.3 update for iPhone 2G. Just point it at the 3.1.2 iPhone 2G IPSW after doing update or restore to 3.1.3. So far we’ve only confirmed this for iPhone 2G. (Note that if this does work for iPhone 3G too, you can *only* use it if you don’t care about the unlock.)
Update 2: [Don’t go near this if you have 3GS, newer ipt2G, or any ipt3G] Can confirm that this method works for iPhone 3G and iPod touch 1G too. Don’t do it for iPhone 3G if you need an unlock though (really, don’t!). For older iPod touch 2G, we’ll need a small (1-character) change in redsn0w source.
Update 3: [Don’t go near this if you have 3GS, newer ipt2G, or any ipt3G] For those with older (non-MC) iPod touch 2G, we’ve compiled a special version of redsn0w meant just for you: Mac and Windows. You guys can get in on the “3.1.2 loophole” too using this special version. Don’t try this if you have a newer iPod Touch 2G or if you’re not completely sure what version you have. And of course don’t try it for 3GS or ipt3G either.
That about does it for the 3.1.2 redsn0w loophole. It can only be used by: those who don’t need the 3G/3GS unlock, and only owners of iPhone 2G, iPhone 3G (not unlockers!), iPod 1G, and iPod 2G older version. Everyone else please wait for official support in the tools.
Hôm nay DEV đã đưa ra bản nâng cấp và sửa lỗi công cụ unlock Ultrasn0w cho iPhone OS 3.1.x với Modem FW 04.26, bản nâng cấp và sửa lỗi này nhằm khắc phục tình trạng mất tên nhà cung cấp dịch vụ. Bạn có thể cập nhật nó thông qua nguồn http://repo666.ultrasn0w.com trong Cydia.
Nguyên văn:
Today we released an ultrasn0w update that fixes an issue for those running firmware 3.1.x with the 04.26 baseband. That specific combination resulted in a missing carrier name in the upper left-hand corner of your home screen. Today’s ultrasn0w update from 0.91 to 0.92 fixes that problem (which was an important issue for roaming). You should see the update available if you have http://repo666.ultrasn0w.com as a Cydia source. Enjoy!
Ý kiến mới nhất